Ga naar inhoud

Windows update werkt niet meer, geen foutcode.

Sophie94

Door Sophie94
in Archief Windows Algemeen

 Delen

Aanbevolen berichten

  • Reacties 64
  • Aangemaakt
  • Laatste reactie

Beste reacties in dit topic

Populaire dagen

Beste reacties in dit topic

Populaire dagen

Geplaatste afbeeldingen

kape Grootmeester

kape

Geplaatst:
Geplaatst:
Ziet het er goed uit??
Er zit inderdaad een onherstelbaar bestand in het log tcpmon.ini dat (mogelijk) voor updateproblemen kan zorgen ? Kojk eens via de zoekfunctie op de PC of er meerdere versies van tcpmon.ini aanwezig zijn op de PC. Zo ja, geef dan de exacte locaties eens op.

P.S. : heb je ook de Windows 7 CD ?

Link naar reactie
Delen op andere sites
Sophie94 Verkenner

Sophie94

Geplaatst:
  • Auteur
Geplaatst:

Bedoel je dat ik tcpmon.ini moet intikken in de zoekfunctie bij start? Als dat zo is zie ik maar 1 x tcpmon.ini staan en dat is het logje wat ik gemaakt heb.

Ik heb wel een CD bij mijn (Dell) laptop gekregen maar daar staat op dat het een Reinstallation DVD is. Kan ik die gebruiken?

Link naar reactie
Delen op andere sites
Sophie94 Verkenner

Sophie94

Geplaatst:
  • Auteur
Geplaatst:

Zie nu dat er een andere tekst staat als ik klik op tcpmon (dat komt tevoorschijn als ik in de zoekfunctie bij start tcpmon.ini intik), het is een hele lap tekst, zal het hier toch maar even neerzetten....

Used by Standard TCP/IP Port Monitor to determine the type of port

;

;

; Section names should be less than 60 characters

;

[Ports]

"*SAVIN Network Printer C model*" = SAVIN_Cmodel

"*Gestetner Network Printer C model*" = Gestetner_Cmodel

"*NRG Network Printer C model*" = NRG_Cmodel

"*infotec Network Printer C model*" = infotec_Cmodel

"*LANIER Network Printer C model*" = LANIER_Cmodel

"*EasyLAN 10i2*" = IMC_10i2

"*EasyLAN Wireless*" = IMC_Wireless

"*Paxar*" = Paxar

"*ExtendNet 100zx" = TROY_100ZX

"*ExtendNet 100x" = TROY_100X

"*ExtendNet 100s" = TROY_100S

"*ExtendNet 100i" = TROY_100I

"*ExtendNet EIX" = TROY_EIX

"*ExtendNet SX" = TROY_SX

"*ExtendNet DX" = TROY_DX

"*ExtendNet MPX" = TROY_MPX

"*ExtendNet*" = TROY_GENERIC

"*PocketPr*" = TROY_PPRO

"*Pony com*" = TROY_PONY

"*Pony 100*" = TROY_P100

"*XJet*" = TROY_XJET

"*XConnectII*" = TROY_XC2

"*XConnect 100*" = TROY_4

"*EtherWind *Wireless*" = TROY_WIFI

"*TROY*" = TROY_GENERIC

"JC-CONNECT*" = silex_JC-CONNECT

"PRICOM*" = silex_PRICOM

"*PRICOM 7*" = silex_PRICOM_7000

"HP *J.sp.00*" = HP_JD_EX_1

"HP *B.*JETDIRECT EX*" = HP_JD_EX_1

"HP *JETDIRECT EX*B.*" = HP_JD_EX_1

"HP *JETDIRECT EX*E.*" = HP_JD_EX_1

"HP *JETDIRECT EX*F.*" = HP_JD_EX_1

"HP *JETDIRECT EX*H.*" = HP_JD_EX_1

"HP *JETDIRECT EX*" = HP_JD_EX

"HP *" = HP_Jetdirect

"Lexmark N4000e" = Lexmark_ex_USB_1

"Lexmark Optra *" = Lexmark_Optra

"Lexmark MarkNet XLe 30*" = Lexmark_ex_3

"MarkNet Pro 3*" = Lexmark_ex_3

"MarkNet Pro 1*" = Lexmark_ex_1

"Lexmark MarkNet XLe 20*" = Lexmark_ex_2

"MarkNet X203*" = Lexmark_ex_3

"MarkNet X201*" = Lexmark_ex_1

"Lexmark *" = Lexmark_Optra

"IBM Network*" = IBM_NP

"IBM InfoPrint*" = IBM_NP

"NetportExpress*PRO* 3-port*" = Intel_PRO_3

"NetportExpress*PRO* Single*" = Intel_PRO_1

"NetportExpress*PRO*External*" = Intel_PRO_3

"NetportExpress*PRO*Internal*" = Intel_PRO_MIO

"NetportExpress* 10* Single*" = Intel_486_1

"NetportExpress* 10* 3-port*" = Intel_486_3

"NetportExpress* 10/100" = Intel_486_1

"Canon Color Laser Beam Printer C LBP 460PS" = Canon_xjdirect

"CANON Network Color PS/PCL Board-A1" = Canon_xjprint

"CANON CP PS-A1" = Canon_xjprint

"CANON LBP-2260PS Ethernet Interface" = Canon_xjprint

"CANON Network Multi-PDL Printer Board-D1" = Canon_print_200_216

"CANON PS Network Printer Board-C1" = Canon_print_200_216

"CANON Network Printer Board-E1" = Canon_print_200_216

"Canon Network Printer Board-F1" = Canon_print_600_605

"Canon PS Network Printer Board-D1" = Canon_print_600_605

"Canon Network Multi-PDL Printer Board-H1" = Canon_print_300_405

"Canon PS Network Printer Board-E1" = Canon_print_300_405

"Canon Network Printer Board-K1" = Canon_print_300_405

"Canon MEDIO/Network Interface Board-E3J" = Canon_lpt1

"version 1" = Canon_lp

"Canon Network Interface Board-C1" = Canon_x

"NB-1" = Canon_x

"NB-2" = Canon_x

"Canon Inc., LBP-1760 Printer" = Canon_PASSTHRU_1

"Canon Inc., LBP-1760e Printer" = Canon_PASSTHRU_1

"Canon Inc., LBP-3260 Printer" = Canon_PASSTHRU_1

"Canon Inc., imageCLASS 4000 Printer" = Canon_PASSTHRU_1

"Network Printer Interface/E" = Canon_PASSTHRU_2

"Network Printer Interface/T" = Canon_PASSTHRU_2

"PS1300/ETX" = Canon_PASSTHRU_2

"Canon NB-*" = Canon_x

"Canon * /P*" = Canon_P9100

"Canon *" = Canon_z

"CASIO PAGEPRESTO *" = CASIO_NWIO

"CASIO *NW*" = CASIO_NW100

"CASIO *" = CASIO_NWIO

"NetQue*" = Emulex_ex

"NETJet*" = Emulex_MIO

"NQMATE*" = Emulex_ex_oneport

"PocketPS*" = Emulex_ex_oneport

"NQPro2*" = Emulex_ex_threeport

"*KYOCERA*" = Kyocera_EcoLAN

"Xerox Document Centre 240*" = Xerox_Document_Centre_240

"Xerox Document Centre 255*" = Xerox_Document_Centre_255

"Xerox Document Centre 265*" = Xerox_Document_Centre_265

"Xerox Document Centre*" = Xerox_DocumentCentre_Family

"1UP*" = Xerox_DocuCentre_240_255_265_L17

"E2D*" = Xerox_DocuCentre_240_255_265_L17

"R5F*" = Xerox_DocuCentre_240_255_265_L17

"R7F*" = Xerox_DocuCentre_240_255_265_L17

"3UP*" = Xerox_DocuCentre_240_255_265_L17

"E8D*" = Xerox_DocuCentre_240_255_265_L17

"T6C*" = Xerox_DocuCentre_240_255_265_L17

"T7C*" = Xerox_DocuCentre_240_255_265_L17

"E5C*" = Xerox_DocuCentre_240_255_265_L17

"E5D*" = Xerox_DocuCentre_240_255_265_L17

"E2C*" = Xerox_DocuCentre_240_255_265_L17

"R4F*" = Xerox_DocuCentre_240_255_265_L17

"R6F*" = Xerox_DocuCentre_240_255_265_L17

"2UP*" = Xerox_DocuCentre_240_255_265_L17

"E6D*" = Xerox_DocuCentre_240_255_265_L17

"181;*" = Xerox_DocuCentre_220_230_332_340_SESS121

"131;*" = Xerox_DocuCentre_220_230_332_340_SESS121

"132;*" = Xerox_DocuCentre_220_230_332_340_SESS121

"191;*" = Xerox_DocuCentre_220_230_332_340_SESS121

"192;*" = Xerox_DocuCentre_220_230_332_340_SESS121

"161;*" = Xerox_DocuCentre_220_230_332_340_SESS121

"162;*" = Xerox_DocuCentre_220_230_332_340_SESS121

"Xerox DocuPrint 4512*" = Xerox_docuprint_4512

"Xerox DocuPrint 4517*" = Xerox_docuprint_4517

"Xerox DocuPrint C55/C55mp*" = Xerox_docuprint_C55

"Xerox DocuPrint N24/N32*" = Xerox_docuprint_N24

"Xerox DocuPrint*" = Xerox_docuprint

"Xerox DocuTech 1*" = Xerox_DocuTech_100_120

"Xerox SESS SNMP Agent*" = Xerox_dcs

"Xerox Phaser*" = Xerox_Phaser

"Xerox WorkCentre*" = Xerox_WorkCentre

"Nuvera 120 LP*" = FX_Nuvera_120_LP

"Nuvera 1*" = Xerox_Nuvera_100_120

"Laser Press*" = FujiXerox_laserpress

"Able Model*" = FujiXerox_ablemodel

"DocuCentre*" = FujiXerox_docucentre

"FUJI XEROX Document Centre*" = FujiXerox_docucentre

"FUJI XEROX DocuCentre*" = FujiXerox_docucentre

"FUJI XEROX DocuColor*" = FujiXerox_docucolor

"FUJI XEROX DocuPrint*" = FujiXerox_docuprint

"FUJI XEROX ApeosPort*" = FujiXerox_apeosport

"Laser Wind*" = FujiXerox_laserwind

"Color Laser Wind*" = FujiXerox_colorlaserwind

"FUJI XEROX NIC*" = FujiXerox_NIC

"EPSON 3*" = Epson_Ex_3

"EPSON *" = Epson_Printer

"Brother NC*" = Brother_Print_Server

"Brother *" = Brother_Print_Server

"MFC-*" = Brother_NC8000

"Tektronix Phaser 300X*" = TEK_300X

"Tektronix*" = TEK

"OKI OkiLAN 6600g *" = OKIDATA2

"OKI OkiLAN 6500e *" = OKIDATA2

"OKI OkiLAN 5550e *" = OKIDATA3

"OKI OkiLAN 9200e *" = OKIDATA3

"OKI OkiLAN 6400e *" = OKIDATA3

"OKI OkiLAN 8150e *" = OKIDATA3

"OKI OkiLAN 8300e *" = OKIDATA3

"OKI OkiLAN 9100e *" = OKIDATA3

"OKI OkiLAN 8400e *" = OKIDATA3

"OKI OkiLAN 8450e *" = OKIDATA3

"OKI OkiLAN 8200e *" = OKIDATA3

"OKI OkiLAN 510w *" = OKIDATA3

"OKI OkiLAN 5540e *" = OKIDATA3

"OKI OkiLAN 5510e *" = OKIDATA3

"OKI OkiLAN 8100e *" = OKIDATA3

"OKI OkiLAN B62e *" = OKIDATA3

"OKI OkiLAN B63e *" = OKIDATA3

"OKI OkiLAN B83e *" = OKIDATA3

"OKI MLETB13 *" = OKIDATA3

"OKI MLETB14w *" = OKIDATA3

"OKI MLETB12 *" = OKIDATA3

"OkiLAN 6*" = Okidata_6100e

"OKILAN*" = OKIDATA

"Digital DNIC-E'Net*" = DIGITAL_LN17

"Digital DSTRP*" = DIGITAL_RP500

"Digital Laser Printer LN17+*" = DIGITAL_LN17

"DIGITAL Laser Printer LN20;*" = DIGITAL_LN20_LN40_LNC02

"DIGITAL Laser Printer LN40;*" = DIGITAL_LN20_LN40_LNC02

"DIGITAL Laser Printer LNC02;*" = DIGITAL_LN20_LN40_LNC02

"DIGITAL RP600 *" = DIGITAL_LN15

"Digital Printer Ethernet*" = DIGITAL_RP200

"Digital* PrintServer*" = DIGITAL_LPSxx

"PrintServer 32*" = DIGITAL_LPSxx

"turbo PrintServer20 *" = DIGITAL_LPSxx

"*imagio MF-P*" = RICOH_generic

"*imagio*" = RICOH_Cmodel

"IPSiO*" = RICOH_Cmodel

"NX-110*" = RICOH_Cmodel

"NX-210*" = RICOH_Cmodel

"NX-500*" = RICOH_Cmodel

"NX-1000*" = RICOH_Cmodel

"NX-510*" = RICOH_Cmodel

"*RICOH Network Printer C model*" = RICOH_Cmodel

"*RICOH Network Printer D model*" = RICOH_Dmodel

"*RICOH Network Printer E model*" = RICOH_Emodel

"*RICOH Network Printer H model*" = RICOH_Hmodel

"X Ricoh SPX*" = RICOH_Hmodel

"X Ricoh Inkjet*" = RICOH_Hmodel

"LinkCom*EIO*" = i-data_LinkCom_EIO

"LinkCom*MIO*" = i-data_LinkCom_MIO

"LinkCom*ISP*" = i-data_LinkCom_ISP

"LinkCom*" = i-data_LinkCom

"EasyCom*" = i-data_EasyCom

"PlusCom*" = i-data_PlusCom

"Minolta Network" = Minolta

"NEC870" = NEC_Network_Printer_PORT1

"NEC SuperScript *" = NEC_Network_Printer_PORT1

"NEC FastEthernet*" = NEC_Network_Printer

"NEC Ethernet *" = NEC_Network_Printer

"NEC *" = NEC_Network_Printer

"AXIS*(Ports 100)*" = AXIS_1P

"AXIS*(Ports 200)*" = AXIS_2P

"AXIS*(Ports 010)*" = AXIS_1U

"AXIS*(Ports 020)*" = AXIS_2U

"AXIS*(Ports 110)*" = AXIS_1P1U

"AXIS*(Ports 120)*" = AXIS_1P2U

"AXIS*(Ports 220)*" = AXIS_2P2U

"AXIS*(Ports 201)*" = AXIS_2P1S

"*(Ports 100)*" = NPS_1P

"*(Ports 200)*" = NPS_2P

"*(Ports 010)*" = NPS_1U

"*(Ports 020)*" = NPS_2U

"*(Ports 110)*" = NPS_1P1U

"*(Ports 120)*" = NPS_1P2U

"*(Ports 220)*" = NPS_2P2U

"*(Ports 201)*" = NPS_2P1S

"AXIS 1440*" = AXIS_1P

"AXIS 1620*" = AXIS_1P

"AXIS 18*" = AXIS_1P

"AXIS 540*542*" = AXIS_1P

"AXIS 5400*" = AXIS_1P

"AXIS 5470*" = AXIS_1P

"AXIS 640/642*" = AXIS_1P

"AXIS 560*" = AXIS_2P1S

"AXIS 570*" = AXIS_2P1S

"AXIS 660*" = AXIS_2P1S

"AXIS 670*" = AXIS_2P1S

"AXIS 5500*" = AXIS_1U

"AXIS 5550*" = AXIS_1P1U

"AXIS 5570*" = AXIS_1P1U

"AXIS 5670*" = AXIS_2P1S

"AXIS 5800*" = AXIS_2P

"AXIS 5900*" = AXIS_2P

"AXIS OfficeBasic USB*" = AXIS_1U

"AXIS OfficeBasic Parallel*" = AXIS_1P

"AXIS OfficeBasic Multiport*" = AXIS_2P

"AXIS OfficeBasic*" = AXIS_1P

"AXIS PrintPoint 1*" = AXIS_1P

"AXIS PrintPoint 5*" = AXIS_2P1S

"AXIS BT-840*" = AXIS_2P

"NPS 540*542*" = NPS_1P

"NPS 5400*" = NPS_1P

"NPS 5470*" = NPS_1P

"NPS 640/642*" = NPS_1P

"NPS 560*" = NPS_2P1S

"NPS 570*" = NPS_2P1S

"NPS 660*" = NPS_2P1S

"NPS 670*" = NPS_2P1S

"NPS 5500*" = NPS_1U

"NPS 5550*" = NPS_1P1U

"NPS 5570*" = NPS_1P1U

"NPS 5670*" = NPS_2P1S

"NPS 5800*" = NPS_2P

"NPS 5900*" = NPS_2P

"NPS OfficeBasic USB*" = NPS_1U

"NPS OfficeBasic Parallel*" = NPS_1P

"NPS OfficeBasic*" = NPS_1P

"NPS PrintPoint 1*" = NPS_1P

"NPS PrintPoint 5*" = NPS_2P1S

"Olivetti DP N*" = Olivetti_DP_N

"Compaq Laser Printer LNC02;*" = COMPAQ_LNC02

"Compaq Laser Printer LN*" = COMPAQ_LNxx

"GENICOM microLaser 200;*" = GENICOM_mL200_mL400_mLC4

"GENICOM microLaser 400;*" = GENICOM_mL200_mL400_mLC4

"GENICOM microLaser C4;*" = GENICOM_mL200_mL400_mLC4

"GENICOM microLaser *" = GENICOM_mLxxx

"GENICOM RP600*" = GENICOM_mL14

"QMS *" = QMS1

"Minolta-QMS *" = MINOLTA_QMS

"Oce digital 31x5*" = OCE_31x5

"Oce Power Print Controller Master*" = OCE_84x5_92xx

"Oce Power Print Controller*" = OCE_84x5

"Oce*" = OCE

"IC*2-*" = SEH_InterCon_Internal

"IC*11-*" = SEH_InterCon_Internal

"IC*7-*" = SEH_InterCon_EPSON

"IC*9-*" = SEH_InterCon_KYOCERA

"IC*5-*" = SEH_InterCon_POCKET

"IC*6-*" = SEH_InterCon_HP

"IC104-*" = SEH_InterCon_BOX1

"IC124-*" = SEH_InterCon_BOX1

"IC144-*" = SEH_InterCon_BOX1

"IC134-*" = SEH_InterCon_BOX2

"IC154-*" = SEH_InterCon_BOX2

"IC103-*" = SEH_InterCon_BOX3

"SB-*" = SEH_KYOCERA_SB

"XB-1*" = SEH_KYOCERA_XB1

"XB-3*" = SEH_KYOCERA_XB3

"NC-*" = SEH_KYOCERAMITA_NC

"PRINTSERVER*" = SEH_OEM

"Roland*" = SEH_ROLAND

"BaseLine*" = SEH_BaseLine

"PS01*" = SEH_InterCon_Internal

"PS03*" = SEH_InterCon_BOX3

"PS19*" = SEH_InterCon_KYOCERA

"PS23*" = SEH_InterCon_BOX3

"PS26*" = SEH_InterCon_HP

"PS34*" = SEH_InterCon_BOX2

"PS54*" = SEH_InterCon_BOX2

"PS102*" = SEH_InterCon_Internal

"PS104*" = SEH_InterCon_BOX1

"PS105*" = SEH_InterCon_POCKET

"PS112*" = SEH_InterCon_Internal

"PS113*" = SEH_InterCon_Internal

"PS152*" = SEH_InterCon_Internal

"SHARP MX*" = SHARP_MX

"SHARP AR*" = SHARP_AR

"SHARP FO*" = SHARP_FO

"Panasonic DP-C*" = Panasonic_Printer_RAW

"Panasonic KX*" = Panasonic_Printer_RAW

"Panasonic DP*" = Panasonic_Printer_LPR

"Panasonic UF*" = Panasonic_Printer_LPR

"Panafax*" = Panasonic_Printer_LPR

"*Panasonic*" = Panasonic_Printer_RAW

"Dell*" = Dell

"Samsung*" = SAMSUNG_PRINTER

"Toshiba e-STUDIO*" = Toshiba_e_STUDIO

"Dell*" = Dell

[<Generic Network Card>]

PORTS = 1

NAME = "Generic Network Card"

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

[iMC_10i2]

NAME = "Intermec EasyLAN 10i2"

PORTS = 1

PROTOCOL1 = "RAW"

NAME1 = "Parallel"

PORTNUMBER1 = 9100

SNMP1 = "?"

[iMC_Wireless]

NAME = "Intermec EasyLAN Wireless"

PORTS = 1

PROTOCOL1 = "RAW"

NAME1 = "Parallel"

PORTNUMBER1 = 9100

SNMP1 = "?"

[PAXAR]

NAME = "PaxarNet"

PORTS = 1

PROTOCOL1 = "RAW"

NAME1 = "Parallel"

PORTNUMBER1 = 9100

SNMP1 = "?"

[TROY_100ZX]

NAME = "TROY ExtendNet 100zx"

PORTS = 6

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

NAME1 = "Port 1 (Z-Link)"

PROTOCOL2 = "RAW"

PORTNUMBER2 = 9101

SNMP2 = "?"

NAME2 = "Port 2 (Z-Link)"

PROTOCOL3 = "RAW"

PORTNUMBER3 = 9102

SNMP3 = "?"

NAME3 = "Port 3 (Z-Link)"

PROTOCOL4 = "RAW"

PORTNUMBER4 = 9103

SNMP4 = "?"

NAME4 = "Port 4 (Z-Link)"

PROTOCOL5 = "RAW"

PORTNUMBER5 = 9104

SNMP5 = "?"

NAME5 = "Port 5 (Z-Link)"

PROTOCOL6 = "RAW"

PORTNUMBER6 = 9105

SNMP6 = "?"

NAME6 = "Port 6 (Z-Link)"

[TROY_100X]

NAME = "TROY ExtendNet 100x"

PORTS = 4

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

NAME1 = "Port 1 (Parallel)"

PROTOCOL2 = "RAW"

PORTNUMBER2 = 9101

SNMP2 = "?"

NAME2 = "Port 2 (Parallel)"

PROTOCOL3 = "RAW"

PORTNUMBER3 = 9102

SNMP3 = "?"

NAME3 = "Port 3 (Parallel)"

PROTOCOL4 = "RAW"

PORTNUMBER4 = 9103

SNMP4 = "?"

NAME4 = "Port 4 (ExtendedLink)"

[TROY_100S]

NAME = "TROY ExtendNet 100s"

PORTS = 2

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

NAME1 = "Port 1 (Parallel)"

PROTOCOL2 = "RAW"

PORTNUMBER2 = 9101

SNMP2 = "?"

NAME2 = "Port 2 (Serial)"

[TROY_100I]

NAME = "TROY ExtendNet 100i"

PORTS = 2

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

NAME1 = "Port 1 (MIO)"

PROTOCOL2 = "RAW"

PORTNUMBER2 = 9101

SNMP2 = "?"

NAME2 = "Port 2 (Parallel)"

[TROY_EIX]

NAME = "TROY ExtendNet EIX"

PORTS = 2

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

NAME1 = "Port 1 (Parallel)"

PROTOCOL2 = "RAW"

PORTNUMBER2 = 9101

SNMP2 = "?"

NAME2 = "Port 2 (Parallel)"

[TROY_SX]

NAME = "TROY ExtendNet SX"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

NAME1 = "Port 1 (Parallel)"

[TROY_DX]

NAME = "TROY ExtendNet DX"

PORTS = 2

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

NAME1 = "Port 1 (Parallel)"

PROTOCOL2 = "RAW"

PORTNUMBER2 = 9101

SNMP2 = "?"

NAME2 = "Port 2 (Parallel)"

[TROY_MPX]

NAME = "TROY ExtendNet MPX"

PORTS = 4

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

NAME1 = "Port 1 (Parallel)"

PROTOCOL2 = "RAW"

PORTNUMBER2 = 9101

SNMP2 = "?"

NAME2 = "Port 2 (Parallel)"

PROTOCOL3 = "RAW"

PORTNUMBER3 = 9102

SNMP3 = "?"

NAME3 = "Port 3 (ExtendedLink)"

PROTOCOL4 = "RAW"

PORTNUMBER4 = 9103

SNMP4 = "?"

NAME4 = "Port 4 (ExtendedLink)"

[TROY_GENERIC]

NAME = "TROY ExtendNet"

PORTS = 1

PROTOCOL1 = "RAW"

NAME1 = "Port 1"

PORTNUMBER1 = 9100

SNMP1 = "?"

[TROY_PPRO]

NAME = "TROY PocketPro"

PORTS = 1

PROTOCOL1 = "RAW"

NAME1 = "Port 1"

PORTNUMBER1 = 9100

SNMP1 = "?"

[TROY_PONY]

NAME = "TROY Pony"

PORTS = 1

PROTOCOL1 = "RAW"

NAME1 = "Parallel"

PORTNUMBER1 = 9100

SNMP1 = "?"

[TROY_P100]

NAME = "TROY Pony 100"

PORTS = 2

PROTOCOL1 = "RAW"

NAME1 = "Parallel"

PORTNUMBER1 = 9100

SNMP1 = "?"

PROTOCOL2 = "RAW"

NAME2 = "Serial"

PORTNUMBER2 = 9101

SNMP2 = "?"

COMMUNITYNAME2 = "public2"

[TROY_XJET]

NAME = "TROY XJet"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

[TROY_XC2]

NAME = "TROY XConnect II"

PORTS = 2

PROTOCOL1 = "RAW"

NAME1 = "Parallel"

PORTNUMBER1 = 9100

SNMP1 = "YES"

PROTOCOL2 = "RAW"

NAME2 = "Serial"

PORTNUMBER2 = 9101

SNMP2 = "?"

COMMUNITYNAME2 = "public2"

[TROY_4]

NAME = "TROY XConnect 100"

PORTS = 4

PROTOCOL1 = "RAW"

NAME1 = "Parallel 1"

PORTNUMBER1 = 9100

SNMP1 = "?"

PROTOCOL2 = "RAW"

NAME2 = "Serial 1"

PORTNUMBER2 = 9101

SNMP2 = "?"

COMMUNITYNAME2 = "public2"

PROTOCOL3 = "RAW"

NAME3 = "Parallel 2"

PORTNUMBER3 = 9102

SNMP3 = "?"

COMMUNITYNAME3 = "public3"

PROTOCOL4 = "RAW"

NAME4 = "Serial 2"

PORTNUMBER4 = 9103

SNMP4 = "?"

COMMUNITYNAME4 = "public4"

[TROY_WIFI]

NAME = "TROY Wireless Print Server"

PORTS = 2

PROTOCOL1 = "RAW"

NAME1 = "Parallel"

PORTNUMBER1 = 9100

SNMP1 = "YES"

PROTOCOL2 = "RAW"

NAME2 = "Serial"

PORTNUMBER2 = 9101

SNMP2 = "?"

COMMUNITYNAME2 = "public2"

[silex_PRICOM]

Ports = 1

Name = "silex Print Server (PRICOM)"

Queue1 = "lp"

Protocol1 = "LPR"

SNMP1 = "No"

LPRDspool1 = 1

[silex_PRICOM_7000]

Ports = 5

Name = "silex Print Server (PRICOM 7000)"

Name1 = "USB port 1"

Queue1 = "lp_u1"

Protocol1 = "LPR"

SNMP1 = "No"

LPRDspool1 = 1

Name2 = "USB port 2"

Queue2 = "lp_u2"

Protocol2 = "LPR"

SNMP2 = "No"

LPRDspool2 = 1

Name3 = "USB port 3"

Queue3 = "lp_u3"

Protocol3 = "LPR"

SNMP3 = "No"

LPRDspool3 = 1

Name4 = "USB port 4"

Queue4 = "lp_u4"

Protocol4 = "LPR"

SNMP4 = "No"

LPRDspool4 = 1

Name5 = "parallel port"

Queue5 = "lp"

Protocol5 = "LPR"

SNMP5 = "No"

LPRDspool5 = 1

[silex_JC-CONNECT]

Ports = 1

Name = "silex Print Server (JC-CONNECT)"

Queue1 = "lp"

Protocol1 = "LPR"

SNMP1 = "No"

LPRDspool1 = 1

[Lexmark_ex_USB_1]

NAME = "Lexmark External Print Server (1 port USB)"

PORTS = 1

PROTOCOL1 = "RAW"

NAME1 = "USB 1"

PORTNUMBER1 = 9100

SNMP1 = "?"

DEVICEIDOID1 = ".1.3.6.1.4.1.641.2.1.2.1.3.1"

[Lexmark_Optra]

PORTS = 1

NAME = "Lexmark Network Printer"

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

DEVICEIDOID1 = ".1.3.6.1.4.1.641.2.1.2.1.3.1"

[Lexmark_ex_3]

NAME = "Lexmark External Print Server (3 port)"

PORTS = 3

PROTOCOL1 = "RAW"

NAME1 = "Parallel 1"

PORTNUMBER1 = 9100

SNMP1 = "?"

DEVICEIDOID1 = ".1.3.6.1.4.1.641.2.1.2.1.3.1"

PROTOCOL2 = "RAW"

NAME2 = "Parallel 2"

PORTNUMBER2 = 9102

SNMP2 = "No"

PROTOCOL3 = "RAW"

NAME3 = "Serial"

PORTNUMBER3 = 9109

SNMP3 = "No"

[Lexmark_ex_2]

NAME = "Lexmark External Print Server (2 port)"

PORTS = 2

PROTOCOL1 = "RAW"

NAME1 = "Parallel 1"

PORTNUMBER1 = 9100

SNMP1 = "?"

DEVICEIDOID1 = ".1.3.6.1.4.1.641.2.1.2.1.3.1"

PROTOCOL2 = "RAW"

NAME2 = "Parallel 2"

PORTNUMBER2 = 9102

SNMP2 = "No"

[Lexmark_ex_1]

NAME = "Lexmark External Print Server (1 port)"

PORTS = 1

PROTOCOL1 = "RAW"

NAME1 = "Parallel 1"

PORTNUMBER1 = 9100

SNMP1 = "?"

DEVICEIDOID1 = ".1.3.6.1.4.1.641.2.1.2.1.3.1"

[HP_Jetdirect]

PORTS = 1

NAME = "Hewlett Packard Jet Direct"

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

DEVICEIDOID1 = ".1.3.6.1.4.1.11.2.3.9.1.1.7.0"

[HP_JD_EX_1]

NAME = "Hewlett Packard JetDirect Ex (single port)"

PORTS = 1

NAME1 = "Parallel"

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "No"

DEVICEIDOID1 = ".1.3.6.1.4.1.11.2.3.9.1.1.7.0"

[HP_JD_EX]

NAME = "Hewlett Packard JetDirect Ex (multi port)"

PORTS = 3

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

NAME1 = "Parallel 1"

DEVICEIDOID1 = ".1.3.6.1.4.1.11.2.3.9.1.1.7.0"

PROTOCOL2 = "RAW"

PORTNUMBER2 = 9101

SNMP2 = "?"

NAME2 = "Parallel 2"

COMMUNITYNAME2 = "public2"

PROTOCOL3 = "RAW"

PORTNUMBER3 = 9102

NAME3 = "Parallel 3"

SNMP3 = "?"

COMMUNITYNAME3 = "public3"

[iBM_NP]

PORTS = 1

NAME = "IBM Network Printer"

PROTOCOL1 = "LPR"

QUEUE1 = "PASS"

SNMP1 = "Yes"

[intel_PRO_3]

NAME = "Intel NetportExpress PRO or PRO/100 3-port"

PORTS = 3

NAME1 = "Parallel 1"

QUEUE1 = "LPT1_PASSTHRU"

NAME2 = "Parallel 2"

QUEUE2 = "LPT2_PASSTHRU"

NAME3 = "Serial"

QUEUE3 = "COM1_PASSTHRU"

PROTOCOL1 = "LPR"

PROTOCOL2 = "LPR"

PROTOCOL3 = "LPR"

SNMP1 = "No"

SNMP2 = "No"

SNMP3 = "No"

[intel_PRO_1]

NAME = "Intel NetportExpress PRO/100 Single-port"

PORTS = 1

NAME1 = "Parallel"

QUEUE1 = "LPT1_PASSTHRU"

PROTOCOL1 = "LPR"

SNMP1 = "No"

[intel_PRO_MIO]

NAME = "Intel NetportExpress PRO Internal MIO"

PORTS = 1

NAME1 = "Internal"

QUEUE1 = "LPT1_PASSTHRU"

PROTOCOL1 = "LPR"

SNMP1 = "No"

[intel_486_3]

NAME = "Intel NetportExpress 10 or 10/100 3-port"

PORTS = 3

NAME1 = "Parallel 1"

QUEUE1 = "LPT1_PASSTHRU"

NAME2 = "Parallel 2"

QUEUE2 = "LPT2_PASSTHRU"

NAME3 = "Serial"

QUEUE3 = "COM1_PASSTHRU"

PROTOCOL1 = "LPR"

PROTOCOL2 = "LPR"

PROTOCOL3 = "LPR"

SNMP1 = "?"

SNMP2 = "?"

SNMP3 = "?"

DEVICEIDOID1 = ".1.3.6.1.4.1.343.2.4.14.3.5.1.1.12.1"

DEVICEIDOID2 = ".1.3.6.1.4.1.343.2.4.14.3.5.1.1.12.2"

[intel_486_1]

NAME = "Intel NetportExpress 10 or 10/100 Single-port"

PORTS = 1

NAME1 = "Parallel"

QUEUE1 = "LPT1_PASSTHRU"

PROTOCOL1 = "LPR"

SNMP1 = "?"

[Canon_xjdirect]

NAME = "Canon Network Printing Device (E model-xjdirect)"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "xjdirect"

SNMP1 = "Yes"

LPRDspool1 = 1

[Canon_xjprint]

NAME = "Canon Network Printing Device (E model-xjprint)"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "xjprint"

SNMP1 = "Yes"

LPRDspool1 = 1

[Canon_print_200_216]

NAME = "Canon 2xx Series"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "print_200-216"

SNMP1 = "Yes"

LPRDspool1 = 1

[Canon_print_600_605]

NAME = "Canon 6xx Series"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "print_600-605"

SNMP1 = "Yes"

LPRDspool1 = 1

[Canon_print_300_405]

NAME = "Canon 3xx/4xx Series"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "print_300-405"

SNMP1 = "Yes"

LPRDspool1 = 1

[Canon_lpt1]

NAME = "Canon MEDIO with NIB-E3J"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "lpt1"

SNMP1 = "Yes"

LPRDspool1 = 1

[Canon_x]

NAME = "Canon Network Printing Device(NT4.0 Compatible Mode)"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "x"

SNMP1 = "Yes"

LPRDspool1 = 1

[Canon_lp]

NAME = "Canon Network Printer"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "lp"

SNMP1 = "Yes"

LPRDspool1 = 1

[Canon_PASSTHRU_1]

NAME = "Canon LBP with SNMP"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "PASSTHRU"

SNMP1 = "Yes"

LPRDspool1 = 1

[Canon_PASSTHRU_2]

NAME = "Canon LBP"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "PASSTHRU"

SNMP1 = "Yes"

LPRDspool1 = 1

[Canon_P9100]

NAME = "Canon Network Printing Device with P9100"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "Yes"

[Canon_z]

NAME = "Canon Network Printing Device"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "z"

SNMP1 = "Yes"

[CASIO_NWIO]

NAME = "CASIO Network Printer (PAGEPRESTO compatible)"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "presto0"

SNMP1 = "?"

LPRDspool1 = 1

[CASIO_NW100]

NAME = "CASIO Network Printer"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "presto0"

SNMP1 = "Yes"

[Emulex_MIO]

NAME = "Emulex Internal MIO card"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "PASSTHRU"

SNMP1 = "No"

[Emulex_ex]

NAME = "Emulex NetQue"

PORTS = 2

NAME1 = "Parallel"

PROTOCOL1 = "RAW"

PORTNUMBER1 = 2501

SNMP1 = "No"

NAME2 = "Serial"

PROTOCOL2 = "RAW"

PORTNUMBER2 = 2502

SNMP2 = "No"

[Emulex_ex_oneport]

NAME = "Emulex NetQue Pocket and NetQue Mate"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "PASSTHRU"

SNMP1 = "No"

[Emulex_ex_threeport]

NAME = "Emulex NetQue Pro2"

PORTS = 3

NAME1 = "parallel1"

PROTOCOL1 = "RAW"

PORTNUMBER1 = 2501

SNMP1 = "No"

NAME2 = "parallel2"

PROTOCOL2 = "RAW"

PORTNUMBER2 = 2502

SNMP2 = "No"

NAME3 = "serial"

PROTOCOL3 = "RAW"

PORTNUMBER3 = 2503

SNMP3 = "No"

[Kyocera_EcoLAN]

NAME = "Kyocera Network Printer"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

[Xerox_DocuCentre_240_255_265_L17]

NAME = "Xerox Document Centre 240/255/265 ST/LP"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "lp"

SNMP1 = "No"

LPRDspool1 = 1

[Xerox_DocuCentre_220_230_332_340_SESS121]

NAME = "Xerox Document Centre 220/230/332/340"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "lp"

SNMP1 = "Yes"

LPRDspool1 = 1

[Xerox_Document_Centre_240]

NAME = "Xerox Document Centre 240 ST"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "lp"

SNMP1 = "Yes"

[Xerox_Document_Centre_255]

NAME = "Xerox Document Centre 255 ST/LP"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "lp"

SNMP1 = "Yes"

[Xerox_Document_Centre_265]

NAME = "Xerox Document Centre 265 ST/LP"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "lp"

SNMP1 = "Yes"

[Xerox_DocumentCentre_Family]

NAME = "Xerox Document Centre Family"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "lp"

SNMP1 = "Yes"

[Xerox_docuprint_4512]

NAME = "Xerox DocuPrint 4512"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "PORT1"

SNMP1 = "Yes"

[Xerox_docuprint_4517]

NAME = "Xerox DocuPrint 4517"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "PASSTHRU"

SNMP1 = "Yes"

[Xerox_docuprint_C55]

NAME = "Xerox DocuPrint C55/C55mp"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 2000

SNMP1 = "Yes"

[Xerox_docuprint_N24]

NAME = "Xerox DocuPrint N24/N32"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 2000

SNMP1 = "Yes"

[Xerox_docuprint]

NAME = "Xerox DocuPrint"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "Yes"

[Xerox_DocuTech_100_120]

NAME = "Xerox DocuTech 100/120"

PORTS = 2

NAME1 = "Socket Gateway (9100 Port)"

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "Yes"

NAME2 = "LPR Gateway"

PROTOCOL2 = "LPR"

QUEUE2 = "default"

SNMP2 = "Yes"

[Xerox_dcs]

NAME = "Xerox DCS"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "lp"

SNMP1 = "No"

[Xerox_Phaser]

NAME = "Xerox Phaser"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "Yes"

DEVICEIDOID1 = ".1.3.6.1.4.1.253.8.51.1.2.1.20.1"

[Xerox_WorkCentre]

NAME = "Xerox WorkCentre"

PORTS = 1

PROTOCOL1 = "RAW"

QUEUE1 = "9100"

SNMP1 = "Yes"

DEVICEIDOID1 = ".1.3.6.1.4.1.253.8.51.1.2.1.20.1"

[Xerox_Nuvera_100_120]

Name = "Xerox Nuvera 100/120"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBERS1 = 9100

SNMP1 = "Yes"

[FX_Nuvera_120_LP]

Name = "Nuvera 120 LP"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBERS1 = 9100

SNMP1 = "Yes"

[FujiXerox_laserpress]

NAME = "Fuji Xerox Laser Press"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "lp"

SNMP1 = "Yes"

LPRDspool1 = 1

[FujiXerox_ablemodel]

NAME = "Fuji Xerox Able Model"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "lp"

SNMP1 = "Yes"

LPRDspool1 = 1

[FujiXerox_docucentre]

NAME = "Fuji Xerox DocuCentre"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "lp"

SNMP1 = "Yes"

LPRDspool1 = 1

[FujiXerox_docucolor]

NAME = "Fuji Xerox DocuColor"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "lp"

SNMP1 = "Yes"

LPRDspool1 = 1

[FujiXerox_docuprint]

NAME = "Fuji Xerox DocuPrint"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "lp"

SNMP1 = "Yes"

LPRDspool1 = 1

[FujiXerox_apeosport]

NAME = "Fuji Xerox ApeosPort"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "lp"

SNMP1 = "Yes"

LPRDspool1 = 1

[FujiXerox_laserwind]

NAME = "Fuji Xerox Laser Wind"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "lp"

SNMP1 = "Yes"

LPRDspool1 = 1

[FujiXerox_colorlaserwind]

NAME = "Fuji Xerox Color Laser Wind"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "lp"

SNMP1 = "Yes"

LPRDspool1 = 1

[FujiXerox_NIC]

NAME = "Fuji Xerox NIC"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "lp"

SNMP1 = "Yes"

LPRDspool1 = 1

[Epson_Printer]

NAME = "EPSON Network Printer"

PORTS = 1

PROTOCOL1 = "LPR"

SNMP1 = "?"

QUEUE1 = "PASSTHRU"

DEVICEIDOID1 = ".1.3.6.1.4.1.1248.1.2.2.1.1.1.1.1"

[Epson_Ex_3]

NAME = "EPSON External 3-port Print Server"

PORTS = 3

NAME1 = "Port1"

PROTOCOL1 = "LPR"

SNMP1 = "No"

QUEUE1 = "PORT1 PASSTHRU"

NAME2 = "Port2"

PROTOCOL2 = "LPR"

SNMP2 = "No"

QUEUE2 = "PORT2 PASSTHRU"

NAME3 = "Port3"

PROTOCOL3 = "LPR"

SNMP3 = "No"

QUEUE3 = "PORT3 PASSTHRU"

[brother_Print_Server]

NAME = "Brother Print Server"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "BINARY_P1"

SNMP1 = "?"

LPRDspool1 = 1

DEVICEIDOID1 = ".1.3.6.1.4.1.2435.2.3.9.1.1.7.0"

[brother_NC8000]

NAME = "Brother Print Server NC-8000"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "lp"

SNMP1 = "?"

LPRDspool1 = 1

DEVICEIDOID1 = ".1.3.6.1.4.1.2435.2.3.9.1.1.7.0"

[TEK_300X]

NAME = "Tektronix Phaser 300X"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "AUTO"

SNMP1 = "?"

LPRDspool1 = 1

[TEK]

NAME = "Tektronix Phaser Share"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

[MINOLTA_QMS]

NAME = "Minolta-QMS Printer"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "crownnet"

SNMP1 = "Yes"

[QMS1]

NAME = "QMS printer"

PORTS = 1

PROTOCOL1 = "LPR"

LPRDspool1 = 1

QUEUE1 = "xxx"

SNMP1 = "?"

[RICOH_generic]

PORTS = 1

NAME = "RICOH Generic Network Printer"

PROTOCOL1 = "LPR"

LPRDspool1 = 1

QUEUE1 = "lp"

SNMP1 = "?"

DEVICEIDOID1 = ".1.3.6.1.4.1.367.3.2.1.1.1.11.0"

[RICOH_Cmodel]

PORTS = 1

NAME = "RICOH Network Printer C model"

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

DEVICEIDOID1 = ".1.3.6.1.4.1.367.3.2.1.1.1.11.0"

[RICOH_Dmodel]

PORTS = 1

NAME = "RICOH Network Printer D model"

PROTOCOL1 = "RAW"

PORTNUMBER1 = 10001

SNMP1 = "?"

DEVICEIDOID1 = ".1.3.6.1.4.1.367.3.2.1.1.1.11.0"

[RICOH_Emodel]

PORTS = 1

NAME = "RICOH Network Printer E model"

PROTOCOL1 = "LPR"

QUEUE1 = "PASSTHRU"

SNMP1 = "?"

DEVICEIDOID1 = ".1.3.6.1.4.1.367.3.2.1.1.1.11.0"

[RICOH_Hmodel]

PORTS = 1

NAME = "RICOH Network Printer H model"

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

DEVICEIDOID1 = ".1.3.6.1.4.1.367.3.2.1.1.1.11.0"

[sAVIN_Cmodel]

PORTS = 1

NAME = "SAVIN Network Printer C model"

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

DEVICEIDOID1 = ".1.3.6.1.4.1.367.3.2.1.1.1.11.0"

[Gestetner_Cmodel]

PORTS = 1

NAME = "Gestetner Network Printer C model"

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

DEVICEIDOID1 = ".1.3.6.1.4.1.367.3.2.1.1.1.11.0"

[NRG_Cmodel]

PORTS = 1

NAME = "NRG Network Printer C model"

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

DEVICEIDOID1 = ".1.3.6.1.4.1.367.3.2.1.1.1.11.0"

[infotec_Cmodel]

PORTS = 1

NAME = "infotec Network Printer C model"

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

DEVICEIDOID1 = ".1.3.6.1.4.1.367.3.2.1.1.1.11.0"

[LANIER_Cmodel]

PORTS = 1

NAME = "LANIER Network Printer C model"

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

DEVICEIDOID1 = ".1.3.6.1.4.1.367.3.2.1.1.1.11.0"

[i-data_LinkCom_EIO]

NAME = "i-data LinkCom EIO"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "Yes"

[i-data_LinkCom_MIO]

NAME = "i-data LinkCom MIO"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "Yes"

[i-data_LinkCom_ISP]

NAME = "i-data LinkCom ISP"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "Yes"

[i-data_LinkCom]

NAME = "i-data LinkCom"

PORTS = 2

NAME1 = "PAR1"

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "Yes"

NAME2 = "PAR2"

PROTOCOL2 = "RAW"

PORTNUMBER2 = 9101

SNMP2 = "Yes"

[i-data_PlusCom]

NAME = "i-data PlusCom"

PORTS = 2

NAME1 = "PAR1"

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "Yes"

NAME2 = "PAR2"

PROTOCOL2 = "RAW"

PORTNUMBER2 = 9101

SNMP2 = "Yes"

[i-data_EasyCom]

NAME = "i-data EasyCom"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "Yes"

[Minolta]

NAME = "Minolta Network Printer"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

[NEC_Network_Printer]

PORTS = 1

NAME = "NEC Network Printer"

PROTOCOL1 = "LPR"

SNMP1 = "?"

LPRDspool1 = 1

[NEC_Network_Printer_PORT1]

PORTS = 1

NAME = "NEC Network Printer PORT1"

PROTOCOL1 = "LPR"

QUEUE1 = "PORT1"

SNMP1 = "?"

LPRDspool1 = 1

[AXIS_1P]

NAME = "Axis Print Server (1 Port - Parallel)"

PORTS = 1

NAME1 = "LPT1"

PROTOCOL1 = "LPR"

QUEUE1 = "LPT1"

SNMP1 = "Yes"

[AXIS_1U]

NAME = "Axis Print Server (1 Port - USB)"

PORTS = 1

NAME1 = "USB1"

PROTOCOL1 = "LPR"

QUEUE1 = "USB1"

SNMP1 = "Yes"

[AXIS_2P]

NAME = "Axis Print Server (2 Ports - Parallel)"

PORTS = 2

NAME1 = "LPT1"

PROTOCOL1 = "LPR"

QUEUE1 = "LPT1"

SNMP1 = "Yes"

NAME2 = "LPT2"

PROTOCOL2 = "LPR"

QUEUE2 = "LPT2"

SNMP2 = "Yes"

[AXIS_2U]

NAME = "Axis Print Server (2 Ports - USB)"

PORTS = 2

NAME1 = "USB1"

PROTOCOL1 = "LPR"

QUEUE1 = "USB1"

SNMP1 = "Yes"

NAME2 = "USB2"

PROTOCOL2 = "LPR"

QUEUE2 = "USB2"

SNMP2 = "Yes"

[AXIS_1P1U]

NAME = "Axis Print Server (2 Ports - Parallel and USB)"

PORTS = 2

NAME1 = "LPT1"

PROTOCOL1 = "LPR"

QUEUE1 = "LPT1"

SNMP1 = "Yes"

NAME2 = "USB1"

PROTOCOL2 = "LPR"

QUEUE2 = "USB1"

SNMP2 = "Yes"

[AXIS_1P2U]

NAME = "Axis Print Server (3 Ports - 1 Parallel and 2 USB)"

PORTS = 3

NAME1 = "LPT1"

PROTOCOL1 = "LPR"

QUEUE1 = "LPT1"

SNMP1 = "Yes"

NAME2 = "USB1"

PROTOCOL2 = "LPR"

QUEUE2 = "USB1"

SNMP2 = "Yes"

NAME3 = "USB2"

PROTOCOL3 = "LPR"

QUEUE3 = "USB2"

SNMP3 = "Yes"

[AXIS_2P2U]

NAME = "Axis Print Server (4 Ports - 2 Parallel and 2 USB)"

PORTS = 4

NAME1 = "LPT1"

PROTOCOL1 = "LPR"

QUEUE1 = "LPT1"

SNMP1 = "Yes"

NAME2 = "LPT2"

PROTOCOL2 = "LPR"

QUEUE2 = "LPT2"

SNMP2 = "Yes"

NAME3 = "USB1"

PROTOCOL3 = "LPR"

QUEUE3 = "USB1"

SNMP3 = "Yes"

NAME4 = "USB2"

PROTOCOL4 = "LPR"

QUEUE4 = "USB2"

SNMP4 = "Yes"

[AXIS_2P1S]

NAME = "Axis Print Server (3 Ports - 2 Parallel and 1 Serial)"

PORTS = 3

NAME1 = "LPT1"

PROTOCOL1 = "LPR"

QUEUE1 = "LPT1"

SNMP1 = "Yes"

NAME2 = "LPT2"

PROTOCOL2 = "LPR"

QUEUE2 = "LPT2"

SNMP2 = "Yes"

NAME3 = "COM1"

PROTOCOL3 = "LPR"

QUEUE3 = "COM1"

SNMP3 = "Yes"

[NPS_1P]

NAME = "Network Print Server (1 Port - Parallel)"

PORTS = 1

NAME1 = "LPT1"

PROTOCOL1 = "LPR"

QUEUE1 = "LPT1"

SNMP1 = "Yes"

[NPS_1U]

NAME = "Network Print Server (1 Port - USB)"

PORTS = 1

NAME1 = "USB1"

PROTOCOL1 = "LPR"

QUEUE1 = "USB1"

SNMP1 = "Yes"

[NPS_2P]

NAME = "Network Print Server (2 Ports - Parallel)"

PORTS = 2

NAME1 = "LPT1"

PROTOCOL1 = "LPR"

QUEUE1 = "LPT1"

SNMP1 = "Yes"

NAME2 = "LPT2"

PROTOCOL2 = "LPR"

QUEUE2 = "LPT2"

SNMP2 = "Yes"

[NPS_2U]

NAME = "Network Print Server (2 Ports - USB)"

PORTS = 2

NAME1 = "USB1"

PROTOCOL1 = "LPR"

QUEUE1 = "USB1"

SNMP1 = "Yes"

NAME2 = "USB2"

PROTOCOL2 = "LPR"

QUEUE2 = "USB2"

SNMP2 = "Yes"

[NPS_1P1U]

NAME = "Network Print Server (2 Ports - Parallel and USB)"

PORTS = 2

NAME1 = "LPT1"

PROTOCOL1 = "LPR"

QUEUE1 = "LPT1"

SNMP1 = "Yes"

NAME2 = "USB1"

PROTOCOL2 = "LPR"

QUEUE2 = "USB1"

SNMP2 = "Yes"

[NPS_1P2U]

NAME = "Network Print Server (3 Ports - 1 Parallel and 2 USB)"

PORTS = 3

NAME1 = "LPT1"

PROTOCOL1 = "LPR"

QUEUE1 = "LPT1"

SNMP1 = "Yes"

NAME2 = "USB1"

PROTOCOL2 = "LPR"

QUEUE2 = "USB1"

SNMP2 = "Yes"

NAME3 = "USB2"

PROTOCOL3 = "LPR"

QUEUE3 = "USB2"

SNMP3 = "Yes"

[NPS_2P2U]

NAME = "Network Print Server (4 Ports - 2 Parallel and 2 USB)"

PORTS = 4

NAME1 = "LPT1"

PROTOCOL1 = "LPR"

QUEUE1 = "LPT1"

SNMP1 = "Yes"

NAME2 = "LPT2"

PROTOCOL2 = "LPR"

QUEUE2 = "LPT2"

SNMP2 = "Yes"

NAME3 = "USB1"

PROTOCOL3 = "LPR"

QUEUE3 = "USB1"

SNMP3 = "Yes"

NAME4 = "USB2"

PROTOCOL4 = "LPR"

QUEUE4 = "USB2"

SNMP4 = "Yes"

[NPS_2P1S]

NAME = "Network Print Server (3 Ports - 2 Parallel and 1 Serial)"

PORTS = 3

NAME1 = "LPT1"

PROTOCOL1 = "LPR"

QUEUE1 = "LPT1"

SNMP1 = "Yes"

NAME2 = "LPT2"

PROTOCOL2 = "LPR"

QUEUE2 = "LPT2"

SNMP2 = "Yes"

NAME3 = "COM1"

PROTOCOL3 = "LPR"

QUEUE3 = "COM1"

SNMP3 = "Yes"

[Olivetti_DP_N]

NAME = "Olivetti DP"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "Yes"

[COMPAQ_LNC02]

NAME = "Compaq Laser Printer LNC02"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 6869

SNMP1 = "?"

[COMPAQ_LNxx]

NAME = "Compaq LN Series Laser Printer (most models)"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

[DIGITAL_LN15]

NAME = "DIGITAL LN15 Series Printer"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 3001

SNMP1 = "No"

[DIGITAL_LN17]

NAME = "DIGITAL LN17 Series Printer"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 2501

SNMP1 = "?"

[DIGITAL_LN20_LN40_LNC02]

NAME = "DIGITAL Laser Printer LN20, LN40, or LNC02"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 6869

SNMP1 = "?"

[DIGITAL_LPSxx]

NAME = "DIGITAL PrintServer Printer"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "xxx"

SNMP1 = "No"

LPRDspool1 = 1

[DIGITAL_RP200]

NAME = "DIGITAL RapidPrint 200 Server"

PORTS = 2

NAME1 = "Parallel"

PROTOCOL1 = "RAW"

PORTNUMBER1 = 10001

SNMP1 = "No"

NAME2 = "Serial"

PROTOCOL2 = "RAW"

PORTNUMBER2 = 10002

SNMP2 = "No"

[DIGITAL_RP500]

NAME = "DIGITAL RapidPrint 500 Server"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 3001

SNMP1 = "No"

[GENICOM_mL14]

NAME = "GENICOM microLaser 14 Printer"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 3001

SNMP1 = "No"

[GENICOM_mL200_mL400_mLC4]

NAME = "GENICOM microLaser 200, 400, or C4 Printer"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 6869

SNMP1 = "?"

[GENICOM_mLxxx]

NAME = "GENICOM microLaser Series Printer (most models)"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

[OCE_31x5]

PORTS = 1

NAME = "Oce digital 31x5 Printer Port"

PROTOCOL1 = "LPR"

QUEUE1 = "LPQUEUE"

SNMP1 = "Yes"

[OCE_84x5]

PORTS = 1

NAME = "Oce 84x5 Printer Port"

PROTOCOL1 = "LPR"

QUEUE1 = "LPQUEUE"

SNMP1 = "Yes"

[OCE_84x5_92xx]

PORTS = 1

NAME = "Oce 84x5/92xx Printer Port"

PROTOCOL1 = "LPR"

QUEUE1 = "LPQUEUE"

SNMP1 = "No"

[OCE]

PORTS = 1

NAME = "Oce Printer Port"

PROTOCOL1 = "LPR"

QUEUE1 = "LPQUEUE"

SNMP1 = "No"

[sEH_InterCon_Internal]

NAME = "SEH InterCon Print Server (Internal Centronics)"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "YES"

COMMUNITYNAME1 = "public"

[sEH_InterCon_HP]

NAME = "SEH InterCon Print Server (HP)"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "YES"

COMMUNITYNAME1 = "public"

[sEH_InterCon_EPSON]

NAME = "SEH InterCon Print Server (EPSON)"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "YES"

COMMUNITYNAME1 = "public"

[sEH_InterCon_KYOCERA]

NAME = "SEH InterCon Print Server (KYOCERA)"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "YES"

COMMUNITYNAME1 = "public"

[sEH_InterCon_POCKET]

NAME = "SEH InterCon Print Server (POCKET)"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "YES"

COMMUNITYNAME1 = "public"

[sEH_InterCon_BOX1]

NAME = "SEH InterCon Print Server (BOX)"

PORTS = 4

PROTOCOL1 = "RAW"

NAME1 = "Parallel 1"

PORTNUMBER1 = 9100

SNMP1 = "YES"

COMMUNITYNAME1 = "public"

PROTOCOL2 = "RAW"

NAME2 = "Parallel 2"

PORTNUMBER2 = 9101

SNMP2 = "YES"

COMMUNITYNAME2 = "public"

PROTOCOL3 = "RAW"

NAME3 = "Parallel 3"

PORTNUMBER3 = 9102

COMMUNITYNAME3 = "public"

SNMP3 = "YES"

PROTOCOL4 = "RAW"

NAME4 = "COM 1"

PORTNUMBER4 = 9103

SNMP4 = "YES"

COMMUNITYNAME4 = "public"

[sEH_InterCon_BOX2]

NAME = "SEH InterCon Print Server (BOX)"

PORTS = 2

PROTOCOL1 = "RAW"

NAME1 = "Parallel"

PORTNUMBER1 = 9100

SNMP1 = "YES"

COMMUNITYNAME1 = "public"

PROTOCOL2 = "RAW"

NAME2 = "USB"

PORTNUMBER2 = 9101

SNMP2 = "YES"

COMMUNITYNAME2 = "public"

[sEH_InterCon_BOX3]

NAME = "SEH InterCon Print Server (BOX)"

PORTS = 2

PROTOCOL1 = "RAW"

NAME1 = "USB1"

PORTNUMBER1 = 9100

SNMP1 = "YES"

COMMUNITYNAME1 = "public"

PROTOCOL2 = "RAW"

NAME2 = "USB2"

PORTNUMBER2 = 9101

SNMP2 = "YES"

COMMUNITYNAME2 = "public"

[sEH_KYOCERA_SB]

NAME = "Kyocera Mita Print Server"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "YES"

COMMUNITYNAME1 = "public"

[sEH_KYOCERA_XB1]

NAME = "External Pocket Kyocera Mita Print Server"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "YES"

COMMUNITYNAME1 = "public"

[sEH_KYOCERA_XB3]

NAME = "External Box Kyocera Mita Print Server"

PORTS = 4

PROTOCOL1 = "RAW"

NAME1 = "Parallel 1"

PORTNUMBER1 = 9100

SNMP1 = "YES"

COMMUNITYNAME1 = "public"

PROTOCOL2 = "RAW"

NAME2 = "Parallel 2"

PORTNUMBER2 = 9101

SNMP2 = "YES"

COMMUNITYNAME2 = "public"

PROTOCOL3 = "RAW"

NAME3 = "Parallel 3"

PORTNUMBER3 = 9102

SNMP3 = "YES"

COMMUNITYNAME3 = "public"

PROTOCOL4 = "RAW"

NAME4 = "COM 1"

PORTNUMBER4 = 9103

SNMP4 = "No"

[sEH_KYOCERAMITA_NC]

NAME = "Multiprotocol Print Server"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "YES"

COMMUNITYNAME1 = "public"

[sEH_OEM]

NAME = "Print Server"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "YES"

COMMUNITYNAME1 = "public"

[sEH_ROLAND]

NAME = "Roland Print Server"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "YES"

COMMUNITYNAME1 = "public"

[sEH_BaseLine]

NAME = "SEH BaseLine Print Server"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

[sHARP_MX]

Ports = 1

Name = "SHARP MX"

Queue1 = "lp"

Protocol1 = "LPR"

SNMP1 = "No"

LPRDspool1 = 0

[sHARP_AR]

Ports = 1

Name = "SHARP AR"

Queue1 = "lp"

Protocol1 = "LPR"

SNMP1 = "No"

LPRDspool1 = 0

[sHARP_FO]

Ports = 1

Name = "SHARP FO"

Queue1 = "lp"

Protocol1 = "LPR"

SNMP1 = "No"

LPRDspool1 = 0

[Panasonic_Printer_RAW]

NAME = "Panasonic Network Printer RAW"

PORTS = 1

NAME1 = "RAW Port"

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

[Panasonic_Printer_LPR]

NAME = "Panasonic Network Printer LPR"

PORTS = 1

NAME1 = "LPR Port"

PROTOCOL1 = "LPR"

QUEUE1 = "lp"

LPRDspool1 = 1

SNMP1 = "?"

[Dell]

NAME = "Dell Netowrk Printer"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "lp"

SNMP1 = "Yes"

NAME = "Dell"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "lp"

SNMP1 = "Yes"

[sAMSUNG_PRINTER]

PORTS = 1

NAME = "Samsung Printer"

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "No"

DEVICEIDOID1 = ".1.3.6.1.4.1.236.11.5.1.1.1.26.0"

[Toshiba_e_STUDIO]

NAME = "Toshiba e-STUDIO Series Network Printer"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "YES"

[OKIDATA]

NAME = "Okidata Network Printer"

PORTS = 1

PROTOCOL1 = "LPR"

QUEUE1 = "PORT_1"

SNMP1 = "No"

[Okidata_6100e]

NAME = "OKI 6000 Series Network Print Server"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

[OKIDATA2]

NAME = "OKI Network Print Device (9102)"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9102

SNMP1 = "?"

[OKIDATA3]

NAME = "OKI Network Print Device (9100)"

PORTS = 1

PROTOCOL1 = "RAW"

PORTNUMBER1 = 9100

SNMP1 = "?"

Link naar reactie
Delen op andere sites
Sophie94 Verkenner

Sophie94

Geplaatst:
  • Auteur
Geplaatst: (aangepast)

Wil ik graag doen, maar hoe zoek ik daarnaar? Als ik de DVD erin doe heb ik de keuze tussen setup uitvoeren en map en bestanden weergeven.

Bij map en bestanden kan ik kiezen uit:

boot

efi

langpacks

sources

support

upgrade

autorun

bootmgr

bootmgr.efi

setup

Op de DVD staat dat het de reinstallation DVD is.

Ik heb nu tussen de mappen en bestanden gezocht maar daar vond ik alleen een tcpip-dl-man. Maar dat is niet wat je vroeg.

Wat nu?

aangepast door Sophie94
Link naar reactie
Delen op andere sites
kape Grootmeester

kape

Geplaatst:
Geplaatst:

Op basis van wat zoekwerk lijkt het er sterk op dat er niet meteen een "snelle" oplossing voor het probleem te vinden is. Meestal wordt geadviseerd om Windows opnieuw te installeren. Ben daar niet meteen een grote voorstander van, maar ga nog even bij de collega's informeren of er (mogelijk) andere suggesties zijn. Al vrees ik daar een beetje voor :dong:

Link naar reactie
Delen op andere sites
Gast
Dit topic is nu gesloten voor nieuwe reacties.
 Delen
Ga naar topic overzicht
Logo

OVER ONS

PC Helpforum helpt GRATIS computergebruikers sinds juli 2006. Ons team geeft via het forum professioneel antwoord op uw vragen en probeert uw pc problemen zo snel mogelijk op te lossen. Word lid vandaag, plaats je vraag online en het PC Helpforum-team helpt u graag verder!

SITEMAP

×
×
  • Nieuwe aanmaken...

Belangrijke informatie

We hebben cookies geplaatst op je toestel om deze website voor jou beter te kunnen maken. Je kunt de cookie instellingen aanpassen, anders gaan we er van uit dat het goed is om verder te gaan.